*Estimates are based on averages and may vary for your project. For an exact calculation of the paint amount required for your specific project, a sample area application on site is always recommended.

Garden Pot Paint is a simple to apply paint for all garden lovers who want to add colour to their unglazed terracotta planters. You can also paint concrete planters. 

250ml will paint around 4 standard sized terracotta pots

1 litre will be enough for a larger planter


Wholesale enquiries are welcome, please use our Bauwerk Trade Program to enquire.

GARDEN POT GUIDE

Learn more about Colour Cards

Learn more about Sample Pots

Learn more about Garden Pot Paint

Learn more about Limewash Paint

If you are new to Bauwerk Colour and are considering a range of colours it is best to start with a selection of our Colour Cards. You can then also narrow down your choice by painting a sample area with a sample pot.

Bauwerk Limewash paint comes in different sizes, for commercial quantities please use our Bauwerk Trade Program.

Garden Pot Paint is a simple to apply paint for all garden lovers who want to add colour to their unglazed terracotta planters.

PAINT SELECTION

My surface is in unmarked condition and has been prepped with BAUWERK Prep Coat

My surface is repaired or has a mixed of materials and has been primed with a water based dry wall primer, then prepped with BAUWERK Prep Coat.

If the wall is new or in unmarked (undamaged) condition all you need is to apply one coat of BAUWERK Prep Coat.
Repaired, patched up surfaces or mixed surfaces need application of 2 coats of a waterbased sealer/undercoat and one coat of BAUWERK Prep Coat.

Consumption of limewash paint is calculated for 2 coats of lime wash paint over BAUWERK Prep Coat. 

Painting a previously painted wall

I am painting over a previously painted wall

I am painting Gypsum Board or Gypsum Plaster surfaces primed with a water based dry wall primer, then prepped with BAUWERK Prep Coat.

New or repaired plasterboard / panel surfaces need to be prepared with the application of 2 coats of a waterbased sealer/undercoat and one coat of BAUWERK Prep Coat.

Consumption of limewash paint is calculated for 2 coats of lime wash paint over BAUWERK Prep Coat.

New or repaired plasterboard / panel surface

I’m painting on a new or repaired plasterboard / panel surface

I am painting over unpainted cement or lime render.

I am painting new concrete or adobe blocks.

I am painting rammed earth or a similar material.

To test if your surface is absorbent simply brush on some water and observe how it is taken up by the surface. If it is beading off or runs down it is likely to be non-absorbent, if it is sucked up you have an absorbent surface.

Consumption of limewash paint is calculated for 2 coats of lime wash paint over new unpainted surface listed above. 

Painting A Breathable / Absorbent Surface

I’m painting on a breathable / absorbent surface

For maintenance and touch ups over existing Bauwerk paint.

If you apply the same or a darker colour usually one coat is enough. 
If a lighter colour is applied over a darker tone you may need to allow for additional application of lime paint.

Consumption of limewash paint is calculated for one maintenance coat of lime wash paint over existing Bauwerk Limewash Paint

Re-Painting Existing Bauwerk Paint

I’m painting over existing Bauwerk paint

There are many possible surfaces that Limewash paint can be applied to.

Ideally the paint is applied onto a moderately absorbent and uniform surface.

Repaired surfaces or raw plasterboard surfaces need a water based undercoat/sealer to eliminate absorbency differences to avoid ''ghosting'' of repaired areas or panelling joints. That is followed by one coat of BAUWERK Prep Coat to complete the preparation before Limewashing your surface.

SURFACES

What surface are you painting on?

LOGIN UPDATE: to comply with higher security features login now does no longer need a password. Instead a code will be sent to the email used for log in (or at checkout). 

Welcome to Bauwerk Colour! We now offer Colour Consultations for all that cannot easily decide from their favourite lime wash colours.

For comments or questions please Contact Us or use our friendly Feedback Widget.

Colours

Paint

Tools & Supplies

See hundreds of unique lime paint colours

Colour Lab

Feeling stuck choosing paint colours for your space? Our colour experts are here to help!

Colour Consultation

Bauwerk Lime Paint Brush Cleaner is a fully biodegradable, olive oil based soap that cleans, nourishes and protects your limewash brushes and prolongs their use. After cleaning your brush with clean water shake the water out of the brush and dip the brush into the soapy liquid. Gently rub the brush and distribute the cleaner into the fibres of your brush. It will keep them supple and in good shape. Our Brush Cleaner comes in a 250ml size and can be used for general cleaning as well.

Bauwerk Lime Paint Brush Cleaner is a fully biodegradable, olive oil based soap that cleans, nourishes and protects your limewash brushes and prolongs their use.
After cleaning your brush with clean water shake the water out of the brush and dip the brush into the soapy liquid. Gently rub the brush and distribute the cleaner into the fibres of your brush. It will keep them supple and in good shape.
Our Brush Cleaner comes in a 250ml size and can be used for general cleaning as well.

Lime Paint Brush Cleaner - 250ml

size