Lime Wash Paint Sample Pots

Bauwerk Sample Pots are ordered to confirm the final shade of colour for a project. That is because light conditions vary, not just between different locations, also by room orientation and with natural or artificial lighting.

When you apply the sample paint on a surface that is closely matching you will be able to judge how the surface texture brings out the colours in a new way.

250ml are usually enough for about 1 to 1.5 m2 of sample area. If you are preferring a larger sample area order more 250ml size or select a 1 liter size.

The sample paint is made to the same specifications. It comes ready to use, just shake it well, stir and decant into another container.

• natural paint made from minerals and pigments
• zero VOC, no solvents, no fumes
• no artificial nano-particles
• simple water based application
• allows walls to breathe – being completely permeable the paint will not lock moisture into walls
• humidity regulating properties improves micro-climate which is safer for people with allergies or chemical sensitivity
• natural antibacterial properties and no electro-static charge
• strengthens and protects masonry surfaces by maintaining alkaline levels so it will not blister or peel making it easy for redecoration
• Green Star compliant – automatically achieves maximum product score
• non-flammable
• manufactured using 100% green power with a very light environmental footprint

Sample Pot paints can be applied directly onto clean interior and exterior walls or portable board surfaces.

For interior application we recommend to use Bauwerk Limewash Prep Coat as a base over previously painted walls, gypsum and lime plasters, gypsum plaster boards, dry wall panels and wall paper.

See information sheets for BAUWERK Limewash Paint ‘Preparation’ before starting your painting project.

Hints

If possible, paint the Bauwerk Sample Pot in an unobtrusive area to prevent the possibility of show-through during your paint.

Alternatively paint onto a board that you can carry around the house.

Avoid painting samples in neat squares, having a feathered out sample will help hide the sample area when repainting.

Use a BAUWERK natural bristle brush as they have specially sourced bristles designed to spread the paint correctly.

Yes, all Lime Wash Sample Pots are ready to use and are made with the actual Limewash Paint

The colour in the Lime wash Sample Pot is accurate when applied to a surface that is a close match to the surface you are wanting to paint.

If you use a sample board you can place it against different walls that receive a different amount of light. In the photo example below you can see how different the the same colour paint appear with more light or less light.

It is very important to view your Colour Samples vertically against the wall and in the correct light, this is because of light refraction, it is always better to look at the card in the actual space, perhaps view the cards over the day to see how the light changes.

As with Colour Cards, if you apply your sample paint on a sample board you can place it flat agains the surface you wish to decorate.

Yes, it is best to have the same preparation steps done for a sample surface as for the final surface.

See information sheets for BAUWERK Limewash Paint ‘Preparation’ before starting your painting project.

1. Mix thoroughly and decant in a suitable container or bucket.
   Make sure no pigment remains in the sample pot, continue to stir paint regularly throughout the painting process.
2. Dip the brush into bucket, flick off the excess paint. Brush can hold a lot of paint but should not be dripping.
3. Using a BAUWERK natural bristle brush, use loose, free strokes to stretch the paint as far as possible in all directions varying horizontal with vertical strokes – do not leave drips or runs.
4. Maintain a wet edge at all times to prevent colour overlays.
5. Do not be alarmed at the darker, transparent look of the paint. As it dries it will lighten to the chosen colour and become opaque, it is very important not to compensate for this transparency by overloading the brush or walls with paint as this will result in poor adherence and powdering.

Limewash paint should be stored in a airtight container, frost free, away from direct sunlight and out of reach from children.

Generally the paint should be used up within 6 months of purchase date. Many colours will store much longer, depending on the pigments the paint is made of.

Clean up
Brushes wash out quickly with minimal water and without harm to groundwater.

Disposal
Allow the leftover lime wash paint to completely dry out. The remaining cake can safely be disposed in the normal household rubbish

Paint splashes can cause irritation to the skin and eyes, please wear personal protection.

Store away from children.

If possible, paint the Bauwerk Sample Pot in an unobtrusive area to prevent the possibility of show-through during your paint.

Alternatively paint onto a board that you can carry around the house.

Avoid painting samples in neat squares, having a feathered out sample will help hide the sample area when repainting.

Use a BAUWERK natural bristle brush as they have specially sourced bristles designed to spread the paint correctly.